Introduction:
We found that many of our friends urge us to try something interesting. So we are here to give you some inspiration for different kinds of laser engravers‘ uses.
Today we bring the method of 2.5D laser engraving stone, and we hope you may like it. If you are also into 2.5D laser engraving, keep reading this article.
Actually, the picture for 2.5D laser engraving needs to be converted from STL, but some of the black and white are already converted and can be used directly in Lightburn.
Basic information:
| Software | Lightburn |
| Machine | ComMarker B4 JPT MOPA Fiber Laser Marking Machine |
| Laser Module Output Power | 30W |
| Material Used | Slate |
| Material Info | 5mm slate |
| Making Time(mins) | 1 hour |
Setting:
| Process Method | Filling |
| Process Material | Slate |
| Speed(mm/s) | 400 |
| Max Power(%) | 100 |
| Mode | 3D Sliced |
| Interval | 0.04 |
| Dot width | 0.04 |
Instruction:
Step1
Test the material you want to laser engrave for the suitable parameter to achieve the effect you want.
Step2
Input the picture.
Step3
Set the parameter.
Step4
Keep patient, and your work will be finished within a few hours.
Design Files:
Download
